Made in accordance with the applicable rules and low no. 46 of 5th March 1990and Presidential Decree no. 1095 dated 3rd August 1968, it is an "ESENCOR" CU DHP copper alloy pipe complying with European Standard EN 1057 - annealed in coils and phosphorous-deoxidised, with minimum 99,9% copper content and 0,015 - 0,040% phosphorous, in compliance with UN1 5649/71 series B, heavy, bearing the marking "ESENCOR D x thickness EN 1057 CU DHP 99,9% SIM I 00".
Covered with an ivory polyvinyl chloride (PVC) sheath. It is non- toxic, odourless and free from chlomfluorocerbons (CFC) and bears the progressive marking "00 ISOCLIMA PVC D x thickness UNI Cig 7129 with ESENCOR copper pipe" as well as an indication of the date, time and production line for quality control purpose.
The main feauteres of the Isopvc sheath are excellent plasticity, mechanical resistance to abrasion and corrosion, and durability.
Isopvc insuleted copper pipe is mainly used in under-floor heating and blumbing system, and gas and air supply lines.
|Insulation thickness||1,5 - 2 mm|
|Operating temperature range||- 80°C - + 100°C|
|Carbon residue||< 0,05 mg/dm2 (as against c ≤ 0,20 mg/dm2 prescribed by UNI EN 1057)|
|Packaging||Comes in single coils wrapped in clear film for added protection, 50 metre coils Ø10 - Ø18, and 25 metre coils Ø22|
|Bare copper pipe dimension (mm)||6x1||8x1||10x1||12x1||14x1||15x1||16x1||18x1||22x1|
|Total dimensions with sheath (mm)||10||12||14||16||18||19||20||22||26|
|Thickness of insulating sheath (mm)||2||2||2||2||2||2||2||2||2|
|Nominal bursting pressure (MPa)||74,8||56,1||44,88||37,4||32,06||29,92||28,05||24,93||20,4|
|Nominal nominating pressure (ASTM B 111 M) (MPa)||18,7||14,03||11,22||9,35||8,01||7,48||7,01||6,23||5,1|
|Weight of copper pipe (Kg/m)||0,1396||0,1954||0,2286||0,2674||0,3223||0,3542||0,3714||0,4296||0,5862|
|Water content per metre of tube (l/m)||0,0126||0,0283||0,0503||0,0785||0,1131||0,1327||0,1539||0,2011||0,3142|
Array ( [p1] => scheda-prodotto [Prod] => isopvc )